The sensor is applicable in control and measuring equipment, instrument engineering, high-temperature electronics and electrical engineering, non-contact automation, and military affairs. It eliminates the parasitic non-equipotential voltage by balancing the potentials inside the substrate and achieving their equality on the two output contacts, which guarantees zero stability and increased accuracy in the magnetic field measurement process. The Hall sensor with a parallel axis of sensitivity contains a semiconductor substrate (1) with an impurity type of conductivity, on one side of which, at a distance from each other, two identical first and second rectangular outer ohmic contacts (2 and 3), parallel to their long sides, are formed. The opposite side of the substrate (1) is a third ohmic contact (4). One terminal of the current source (8) is connected to the third ohmic contact (4). The external magnetic field is applied perpendicularly to the cross-section of the substrate (1), with the two outer ohmic contacts serving as the output. At equal distances from the outer ohmic contacts (2 and 3), two more inner ohmic contacts (5 and 6), rectangular and identical to each other, are formed. They are arranged parallel with their long sides to the outer ohmic contacts; the two inner ohmic contacts are directly connected to the two terminals of a trimmer (7), the middle terminal of which is connected to the other terminal of the current source (8).